Test Mode Tools Logo

Glue PVC to Wood

Fixing wood to PVC is not difficult at all. But many people spend hours trying to figure out how to do it.

Because we understand your concern, we have come up with some brilliant ways to fix wood to PVC.

A few of the ways we will discuss are as follows:

As mentioned earlier, all methods are applicable, so you can give them a try. Let’s go over the techniques one by one.

Hot glue:

People will be amazed at how effective this DIY project tool is in fixing PVC to wood. Glue sticks work with a hot glue gun. Different types of glue sticks are available for different tasks. One type is low-temperature glue sticks, another is high-temperature glue sticks, and another is the bot.

One must realize, however, that the bond created by the glue gun is not particularly strong and hard. The bond is temporary and relatively weak. It is possible to achieve a better bond with one glue stick, but overall, this method is not permanent.

You should also keep one thing in mind. There are many glue sticks available on the market that are general-purpose. If you want better results, you need something with greater strength.


Epoxy can also be used to fix PVC and wood. Epoxy has been used in many fields for many purposes. Metal coatings, adhesives, electrical insulators, and many more are made from them. The focus here is on its adhesive properties to fix wood to PVC.

Once you get your hands on an epoxy applicator kit, you are all set to go!

First, you need to mix the two parts ( the resin and the hardener), and then you need to apply them to the desired objects. Make sure you apply it using a toothpick or something like that. Epoxy takes a longer time ( sometimes twenty hours) to dry entirely. So, be patient and see the results!

Contact cement:

Third on the list is the use of contact cement. This one, however, is highly toxic. Also, this is flammable and abrasive. Therefore, always wear safety gloves when working and stay away from fire or fireworks.

The stuff can be applied with a roller brush. If you don’t cover the surface area of both objects clearly, they will not stick together. Keep that in mind. Once that’s done, you have to apply pressure to both items to get them to stick.

If you need to rectify any mistakes, use a clothes iron. This will reactivate the cement and allow you to correct the error.


Super glue is one of the best options for attaching wood to PVC. Various brands are available on the market. Just make sure you choose the right one. Gels work best. Other options are also acceptable.

If you sand the PVC a little bit with regular sandpaper, it will be easier for it to hold. The wood can also be cleaned with a damp cloth. Avoid making the wood too wet; otherwise, it won’t hold the glue well.

For better results, it is always better to leave the stuff overnight.

Mechanical way:

Well, all the methods above can undoubtedly provide you with satisfying results. This will be your best choice if you are looking for a permanent solution. Another option would be to mechanically fasten two materials together.

Both materials can be tied mechanically by drilling or screwing. Drill a hole through the materials and attach a washer or nut to tighten the fastening. You may also consider screwing directly through the wood and the PVC.

The method is more powerful than any other method, and it is permanent as well. However, depending on your purpose, it might not be the best option for you. It’s entirely up to you to decide.


What glue do you use to stick plastic to wood?

Does Gorilla Glue bond plastic to plastic?

Will Super Glue work on PVC pipe?


So these are the best methods to fix PVC to wood. Other methods are also available. You can also use gorilla glue to fix it. Other construction adhesives (other than epoxy) may also work. However, the mechanical way is the safest and strongest. If you want a permanent solution, mechanically fastening the two materials will be your best bet. Of course, you can choose whatever you want.

Good luck!